Inquiry for Pricelist
For inquiries about our products or pricelist, please leave your email to us and we will be in touch within 24 hours.
CLICK TO SUBMIT AN INQUIRY
Best quality Polyester Resin - Transparent Epoxy Resin Clear Room Temperature Cure and Low Viscosity – Dujiang
With our outstanding administration, powerful technical capability and strict top quality handle procedure, we go on to provide our purchasers with reliable good quality, reasonable selling prices and excellent services. We goal at becoming certainly one of your most responsible partners and earning your gratification for Fiberglass Combination Cltoh, Fiberglass Mat Chopped Strand, Orthophthalic Unsaturated Polyester Resin, The concept of our corporation is "Sincerity, Speed, Services, and Satisfaction". We're going to follow this concept and gain more and far more customers' pleasure.
Best quality Polyester Resin - Transparent Epoxy Resin Clear Room Temperature Cure and Low Viscosity – Dujiang Detail:
Applications:
Suitable for general casting products with variable thickness.
Properties:
Low viscosity
Excellent transparency
Room temperature cure
Recommended process:
Casting
| Basic Data | |||
| Resin |
GE-7502A |
Standard |
|
| Aspect | Colourless transparent viscous liquid |
- |
|
| Viscosity at 25℃ [mPa·s] |
1,400-1,800 |
GB/T 22314-2008 |
|
| Density [g/cm3] |
1.10-1.20 |
GB/T 15223-2008 |
|
| Epoxide Value [eq/100 g] |
0.53-0.59 |
GB/T 4612-2008 |
|
| Hardener |
GE-7502B |
Standard |
|
| Aspect | Colourless transparent liquid |
- |
|
| Viscosity at 25℃ [mPa·s] |
8-15 |
GB/T 22314-2008 |
|
| Amine Value [mg KOH/g] |
400-500 |
WAMTIQ01-018 |
|
|
Processing Data |
|||
| Mix Ratio | Resin ：Hardener |
Ratio by weight |
Ratio by volume |
| GE-7502A : GE-7502B |
3:1 |
100:37-38 |
|
| Initial Mix Viscosity | GE-7502A : GE-7502B |
Standard |
|
| [mPa·s] |
25℃ |
230 |
WAMTIQ01-003 |
| Pot Life | GE-7502A : GE-7502B |
Standard |
|
| [min] |
25℃ |
180-210 |
WAMTIQ01-004 |
| Glass transitiontemperature Tg [℃] | GE-7502A : GE-7502B |
Standard |
|
| 60 °C × 3 h + 80 °C × 3 h |
≥60 |
GB/T 19466.2-2004 |
|
|
Recommended Curing Condition: |
||
| Thickness | First cure | Post cure |
| ≤ 10 mm | 25 °C × 24 h or 60 °C × 3 h | 80 °C × 2 h |
| > 10 mm | 25 °C × 24 h | 80 °C × 2 h |
| Properties of Casting Resin | |||
| Curing condition | 60 °C × 3 h + 80 °C × 3 h |
Standard |
|
| Product type | GE-7502A/GE-7502B |
- |
|
| Flexural strength [MPa] |
115 |
GB/T 2567-2008 |
|
| Flexural modulus [MPa] |
3456 |
GB/T 2567-2008 |
|
| Compressive strength [MPa] |
87 |
GB/T 2567-2008 |
|
| Compressive modulus [MPa] |
2120 |
GB/T 2567-2008 |
|
| Hardness Shore D |
80 |
||
| Package | |||
| Resin | IBC Ton barrel: 1100kg/ea;Steel Drum: 200kg/ea; Buckle Bucket: 50kg/ea; | ||
| Hardener | IBC Ton barrel: 900kg/ea;Steel Drum: 200kg/ea; Plastic Bucket: 20kg/ea; | ||
| Note： | Customized package is available | ||
|
Instructions |
| To Check whether there is crystallization in GE-7502A agent before using it. If there is crystallization, measures should be taken as following:It should not to be used until the crystallization totally dissolve and the baking temperature is 80℃. |
|
Storage |
| 1. GE-7502A maybe crystallize at low temperature. |
| 2. Do not expose under sunlight and store in clean, cool and dry place. |
| 3. Sealed immediately after use. |
| 4. Recommended product shelf life – 12 months. |
| Handling Precautions | |
|
Personal Protection Equipmen |
1. Wear protection gloves to avoid direct contact with skin. |
|
Respiratory Protection |
2. No special protection. |
|
Eyes Protection |
3. Chemical anti-spattering goggles and face guard are recommended. |
|
Body Protection |
4. Use a protection coat which can be resisted, protection shoes, gloves, coat and emergency shower equipment according to situations. |
| First aid | |
| Skin | Wash with warm soap water for at least 5 minutes or the contaminant removed. |
|
Eyes |
|
|
Inhalation |
|
Important notice:
The data contained in this publication are based on tests in specific condition by Wells Advanced Materials (Shanghai) Co., Ltd. In view of the many factors that may affect processing and applications of our products, these data DO NOT relieve processors from carrying out their own investigations and tests. Nothing herein is to be construed as a warranty. It is the responsibility of the user to determine the applicability of such information and recommendations and the suitability of any product for its own particular purposes.
Product detail pictures:
Related Product Guide:
Assume full responsibility to satisfy all needs of our clients; achieve continual advancements by endorsing the expansion of our purchasers; turn into the final permanent cooperative partner of clientele and maximize the interests of clients for Best quality Polyester Resin - Transparent Epoxy Resin Clear Room Temperature Cure and Low Viscosity – Dujiang , The product will supply to all over the world, such as: Oman, United Arab Emirates, Sierra Leone, Most problems between suppliers and clients are due to poor communication. Culturally, suppliers can be reluctant to question things they do not understand. We break down those barriers to ensure you get what you want to the level you expect, when you want it. Faster delivery time and the product you want is our Criterion .
By Nicole from USA - 2018.12.14 15:26
The customer service staff is very patient and has a positive and progressive attitude to our interest, so that we can have a comprehensive understanding of the product and finally we reached an agreement, thanks!
By Gabrielle from Mauritius - 2018.06.03 10:17
-
Europe style for Fibreglass - Accelerator Coba...
-
Alkali Resistant Fiberglass Direct Roving C Gla...
-
Wholesale Dealers of 6mm Carbon Fiber Sheet - ...
-
2022 High quality E-Glass Woven Roving - Accel...
-
High Quality for Carbon Steel Sheet Plate - Co...
-
Massive Selection for 0.2mm Carbon Fiber Sheet ...
