Inquiry for Pricelist
For inquiries about our products or pricelist, please leave your email to us and we will be in touch within 24 hours.
CLICK TO SUBMIT AN INQUIRY
Factory wholesale Eopxy Resin – 711 Vinyl Ester Resin frp epoxy high temp bisphenol-a – Dujiang
Our business puts emphasis over the administration, the introduction of talented staff, plus the construction of employees building, striving hard to boost the standard and liability consciousness of staff members. Our corporation successfully attained IS9001 Certification and European CE Certification of Reinforced Fiberglass Cloth, Alkali Free Glass Fiber Woven Roving, Fiberglass Wall Meshe, We sincerely hope to establish some satisfactory relationships with you in the near future. We will keep you informed of our progress and look forward to building steady business relations with you.
Factory wholesale Eopxy Resin – 711 Vinyl Ester Resin frp epoxy high temp bisphenol-a – Dujiang Detail:
Benefits & Properties
● Easier workability, good air drying.
● Shorter gel-to-cure interval, reduced stress cracking,
● The resin’s improved reactivity properties often permit an increase in the lay-up thickness per session.
● Higher elongation provides FRP equipment with increased toughness
● Lighter color makes defects easier to see and correct while the resin is still workable.
● Longer shelf life provides additional flexibility to fabricators in storage and handling.
Applications and Fabrication Techniques
● FRP storage tanks, vessels, ducts, and on-site maintenance projects, particularly in chemical processing and pulp and paper operations.
● The resin is designed for ease of fabrication using hand lay-up, spray-up, filament winding, compression molding and resin transfer molding techniques, pultrusion and molded grating applications.
● When properly formulated and cured, complies with FDA regulation 21 CFR 177.2420, covering materials intended for repeated use in contact with food.
● Lloyds’ approved in the name of 711
Typical Liquid Resin Properties
| Property (1) | Value |
| Appearance | Light yellow |
| Viscosity cPs 25℃ Brookfield #63@60rpm | 250-450 |
| Styrene Content | 42-48% |
| Shelf Life (2), Dark, 25℃ | 10 months |
(1)Typical property values only, not to be construed as specifications
(2)Unopened drum with no additives, promoters, accelerators, etc. added. Shelf life specified from date of manufacture.
Typical Properties (1) Resin Clear Casting (3)
| Property | Value | Test Method |
| Tensile Strength / MPa | 80-95 | |
| Tensile Modulus / GPa | 3.2-3.7 | ASTM D-638 |
| Elongation at break / % | 5.0-6.0 | |
| Flexural Strength / MPa | 120-150 | |
| ASTM D-790 | ||
| Flexural Modulus / GPa | 3.3-3.8 | |
| HDT (4) ℃ | 100-106 | ASTM D-648Method A |
| Barcol Hardness | 38-42 | Barcol 934-1 |
(3)Cure schedule: 24 hours at room temperature; 2 hours at 120C
(4)Maximum stress: 1.8 MPa
Safety and Handling Consideration
This resin contains ingredients which could be harmful if mishandled. Contact with skin and eyes should be avoided and necessary protective equipment and clothing should be worn.
The specification is 2011 edition and may change with the technological improvement. Sino Polymer Co., Ltd. maintains Material Safety Data Sheets on all of its products. Material Safety Data Sheets contain health and safety information for your development of appropriate product handling procedures to protect your employees and customers.
Our Material Safety Data Sheets should be read and understood by all of your supervisory personnel and employees before using our products in your facilities.
Recommended Storage:
Drums – Store at temperatures below 25℃. Storage life decreases with increasing storage temperature. Avoid exposure to heat sources such as direct sunlight or steam pipes. To avoid contamination of product with water, do not store outdoors. Keep sealed to prevent moisture
pick-up and monomer loss. Rotate stock.
Product detail pictures:
Related Product Guide:
With our loaded practical experience and thoughtful solutions, we now have been identified for a trusted provider for numerous intercontinental consumers for Factory wholesale Eopxy Resin – 711 Vinyl Ester Resin frp epoxy high temp bisphenol-a – Dujiang , The product will supply to all over the world, such as: San Francisco, Sydney, Venezuela, We have a strict and complete quality control system, which ensures that each product can meet quality requirements of customers. Besides, all of our products have been strictly inspected before shipment.
By Doris from Armenia - 2018.05.22 12:13
As an international trading company, we have numerous partners, but about your company, I just want to say, you are really good, wide range, good quality, reasonable prices, warm and thoughtful service, advanced technology and equipment and workers have professional training, feedback and product update is timely, in short, this is a very pleasant cooperation, and we look forward to the next cooperation!
By Beulah from Greece - 2018.09.08 17:09
-
PriceList for Prepreg Carbon Fiber Cloth - Col...
-
2022 wholesale price Fiberglass Mesh Repair Ta...
-
Reasonable price for Fiberglass Cloth Fire Resi...
-
New Arrival China Fireproof Cloth - Thermosett...
-
2022 Latest Design Plain Weave Fiberglass Clot...
-
Chop Strand Mat - Aramid fiber fabric bulletpr...
