Inquiry for Pricelist
For inquiries about our products or pricelist, please leave your email to us and we will be in touch within 24 hours.
CLICK TO SUBMIT AN INQUIRY
Manufacturing Companies for Solid Fiberglass Rods - 45 gsm fiberglass mesh roll for concrete – Dujiang
Our development depends on the advanced equipment ,excellent talents and continuously strengthened technology forces for Ar Glassfibre Roving, E-Glass Ecr Fiberglass Roving 2400tex, glass fiber panel roving, We encourage you to make contact as we are looking for partners in our venture. We are sure you will find doing business with us not only fruitful but also profitable. We are ready to serve you with what you require.
Manufacturing Companies for Solid Fiberglass Rods - 45 gsm fiberglass mesh roll for concrete – Dujiang Detail:
Product features
(1)Good chemical stability.Alkali resistance， acid resistance， water resistance， cement erosion, other chemical corrosion, and so on.
(2)High strength， high modulus, and lightweight.
(3)Better dimension stability， hard， flat， not easy to contract deformation and positioning.
(4)Good impact resistance. （due to its high strength and toughness）
(5)Strict selection of materials:Using high-quality medium alkali or alkali-free glass fiber， alkali resistance is good.
(6)Exquisite craft:The products are made by precision machinery, the net surface is smooth and resistant to pulling.
(7)High-quality features:The product has high strength. good alkali resistance， strong interweaving joints, and uniform mesh.
(8)Construction is convenient:No cracking due to seasonal change, temperature change， strong cracking resistance， and long use time.
Application
Suitable for indoor and outdoor decoration，all kinds of partition wall panels, gypsum boards， three plywood ceilings， and internal and external plywood joints，to prevent cracking， especially for the slight displacement of non-structural walls caused by thermal expansion and contraction or other unknown reasons， And the cracking of the wall finish coating， which acts as a buffer， can also enhance the adhesion of the wall finish coating and improve the impact resistance.
(1)the wall reinforced material:
(2)reinforced cement products；
(3)exterior insulation：
(4)private networks（VPNS).granite, Mosaic，marble back net；
(5)waterproofing materials， asphalt roofing waterproof
(6)reinforced plastic， rubber skeleton materials:
(7)fire prevention board；
(8)grinding wheel base
(9)road surface geogrid；
(10)building sealing tape， etc
Specifications
• 16×16 mesh, 12×12 mesh, 9×9 mesh, 6×6 mesh, 4×4 mesh, 2.5×2.5 mesh
15×14 mesh, 10×10 mesh, 8×8 mesh, 5×4 mesh, 3×3 mesh, 1×1 mesh and so on.
• Weight/sq.meter: 40g—800g
• Each roll length: 10m, 20m, 30m, 50m—300m
• Width: 1m—2.2m
• Color: White (standard) blue, green, orange, yellow and others.
• We can produce many specifications and use different packaging according to customers’requests.
Usage
• 75g / m2 or less: Used in the reinforcement of thin slurry .
• 110g / m2 or about: Widely used in indoor and outdoor walls .
• 145g/m2 or about: Used in the wall and be mixed in various materials.
• 160g / m2 or about: Used in insulator layer of reinforcement in the mortar.
Techinical data
|
Item Number |
Yarn(Tex) |
Mesh(mm) |
Density Count/25mm |
Tensile Strength × 20cm |
Woven Structure
|
Content of resin%
|
||||
| Warp |
Weft |
Warp |
Weft |
Warp |
Weft |
Warp |
Weft |
|||
|
45g2.5×2.5 |
33×2 |
33 |
2.5 |
2.5 |
10 |
10 |
550 |
300 |
Leno |
18 |
|
60g2.5×2.5 |
40×2 |
40 |
2.5 |
2.5 |
10 |
10 |
550 |
650 |
Leno |
18 |
|
70g 5×5 |
45×2 |
200 |
5 |
5 |
5 |
5 |
550 |
850 |
Leno |
18 |
|
80g 5×5 |
67×2 |
200 |
5 |
5 |
5 |
5 |
700 |
850 |
Leno |
18 |
|
90g 5×5 |
67×2 |
250 |
5 |
5 |
5 |
5 |
700 |
1050 |
Leno |
18 |
|
110g 5×5 |
100×2 |
250 |
5 |
5 |
5 |
5 |
800 |
1050 |
Leno |
18 |
|
125g 5×5 |
134×2 |
250 |
5 |
5 |
5 |
5 |
1200 |
1300 |
Leno |
18 |
|
135g 5×5 |
134×2 |
300 |
5 |
5 |
5 |
5 |
1300 |
1400 |
Leno |
18 |
|
145g 5×5 |
134×2 |
360 |
5 |
5 |
5 |
5 |
1200 |
1300 |
Leno |
18 |
|
150g 4×5 |
134×2 |
300 |
4 |
5 |
6 |
5 |
1300 |
1300 |
Leno |
18 |
|
160g 5×5 |
134×2 |
400 |
5 |
5 |
5 |
5 |
1450 |
1600 |
Leno |
18 |
|
160g 4×4 |
134×2 |
300 |
4 |
4 |
6 |
6 |
1550 |
1650 |
Leno |
18 |
|
165g 4×5 |
134×2 |
350 |
4 |
5 |
6 |
5 |
1300 |
1300 |
Leno |
18 |
PACKING AND STORAGE
·Fiber glass mesh is usually wrapped by polyethylene bag,then 4rolls are put into a suitable corrugated carton.
·A 20 feet standard container can fill about 70000m2 fiberglass mesh,a 40 feet container can fill about 15000
m2 of fiberglass net cloth.
·Fiberglass mesh should be stored in a cool, dry, water-proof area. It is recommended that the room
temperature and humidity be always maintained at 10℃ to 30℃ and 50% to 75% respectively.
·Please keep the product in its original packaging before being used for no more than 12 months, avoiding
moisture absorption.
·Delivery Detail:15-20 days after receive the advance payment.
Product detail pictures:
Related Product Guide:
It really is our obligation to satisfy your requirements and efficiently serve you. Your fulfillment is our greatest reward. We're hunting forward to your check out for joint development for Manufacturing Companies for Solid Fiberglass Rods - 45 gsm fiberglass mesh roll for concrete – Dujiang , The product will supply to all over the world, such as: Ghana, Montreal, Benin, With the aim of "compete with good quality and develop with creativity" and the service principle of "take customers' demand as orientation", we will earnestly provide qualified products and good service for domestic and international customers.
By Tyler Larson from Sri Lanka - 2017.06.16 18:23
The sales manager has a good English level and skilled professional knowledge, we have a good communication. He is a warm and cheerful man, we have a pleasant cooperation and we became very good friends in private.
By Marina from Morocco - 2017.05.02 11:33
