Inquiry for Pricelist
For inquiries about our products or pricelist, please leave your email to us and we will be in touch within 24 hours.
CLICK TO SUBMIT AN INQUIRY
Wholesale Price China Two Part Epoxy Resin - Unsaturated Polyester Resin Manufacturers – Dujiang
Bear "Customer first, High quality first" in mind, we perform closely with our consumers and provide them with efficient and experienced services for Glassfiber Cloth, Fiber Glass Mat 225g, Fiber Glass Winding Roving, Welcome your enquiry, best service will be provided with full heart.
Wholesale Price China Two Part Epoxy Resin - Unsaturated Polyester Resin Manufacturers – Dujiang Detail:
PROPERTY
•7937 resin polyester resin with medium reactivity
•Moderate temperature peak, high strength, shrinkage, good toughness
APPLICATION
•It is suitable for solidifying quartz stone at room temperature and medium temperature.,ect
QUALITY INDEX
| ITEM | Range | Unit | Test Method |
|
Appearance |
Light yellow |
||
| Acidity |
15-21 |
mgKOH/g |
GB/T 2895-2008 |
|
Viscosity, cps 25℃ |
0.65-0.75 |
Pa. s |
GB/T 2895-2008 |
|
Gel time, min 25℃ |
4.5-9.5 |
min |
GB/T 2895-2008 |
|
Solid content, % |
63-69 |
% |
GB/T 2895-2008 |
|
Thermal stability, 80℃ |
≥24 |
h |
GB/T 2895-2008 |
|
color |
≤70 |
Pt-Co |
GB/T7193.7-1992 |
Tips: Detection of Gelation Time: 25°C water bath, 50g resin with 0.9g T-8m ( L % CO) and 0.9g M-50 (Akzo-Nobel)
MEMO: If you have special requirements of the curing characteristics, please contact our technical center
MECHANICAL PROPERTY OF CASTING
| ITEM | Range |
Unit |
Test Method |
| Barcol hardness |
35 |
GB/T 3854-2005 |
|
| Heat Distortion temperature |
48 |
°C |
GB/T 1634-2004 |
| Elongation at break |
4.5 |
% |
GB/T 2567-2008 |
| Tensile strength |
55 |
MPa |
GB/T 2567-2008 |
| Tensile modulus |
3300 |
MPa |
GB/T 2567-2008 |
| Flexural Strength |
100 |
MPa |
GB/T 2567-2008 |
| Flexural modulus |
3300 |
MPa |
GB/T 2567-2008 |
| Impact strength |
7 |
KJ/㎡ |
GB/T2567-2008 |
MEMO: Performance standard: GB/T8237-2005
PACKING AND STORAGE
• The product should be packed into clean, dry, safe and sealed container, net weight 220 Kg.
• Shelf life: 6 months below 25℃, stored in cool and well
ventilated place.
• Any special packing requirement, please contact our support team
NOTE
• All information in this catalog is based on GB/T8237-2005 standard tests, only for reference; maybe differ from the actual test data.
• In the production process of using resin products, because the performance of user products is affected by multiple factors, it is necessary for users to test themselves before selecting and using resin products.
• Unsaturated polyester resins are unstable and should be stored below 25°C in a cool shade, conveyance in refrigeration car or in nighttime, averting from sunshine.
•Any unsuitable condition of storage and conveyance will cause the shortening of shelf life.
INSTRUCTION
• 7937 resin does not contain wax, accelerator and thixotropic additives.
• 7937 resin is suitable for curing at room temperature and medium temperature. Medium temperature curing is more conducive to production control and product performance assurance. Recommended for medium temperature curing system: tert-butyl peroxide isooctanoate TBPO (content ≥97%), 1% resin content; curing temperature, 80±5℃, curing not less than 2.5 hours. Recommended coupling agent: γ-methacryloxypropyl trimethoxysilane KH-570, 2% resin content.
• 7937 resin has wide applicability; it is recommended to choose 7982 resin or o-phenylene-neopentyl glycol 7964L resin with higher performance requirements; it is recommended to choose m-phenylene-neopentyl glycol 7510 for higher water resistance, heat resistance and weather resistance. Resin; if the equipment can meet the requirements, please choose low-viscosity isophthalic 7520 resin, which is more economical and has better performance.
• In the production process of the product, after heating and curing, it should be steadily lowered to room temperature, to avoid rapid cooling, to prevent product deformation or cracking, especially in winter. The cutting and polishing of quartz stone in the production process should be carried out after sufficient post-curing.
• The moisture absorption of the filler should be avoided. Excessive moisture content will affect the curing of the product and cause performance degradation.
Product detail pictures:
Related Product Guide:
We insist on the principle of development of 'High quality, Efficiency, Sincerity and Down-to-earth working approach' to deliver you with great provider of processing for Wholesale Price China Two Part Epoxy Resin - Unsaturated Polyester Resin Manufacturers – Dujiang , The product will supply to all over the world, such as: Tunisia, Bulgaria, Brasilia, To achieve reciprocal advantages, our company is widely boosting our tactics of globalization in terms of communication with overseas customers, fast delivery, the best quality and long-term cooperation. Our company upholds the spirit of "innovation, harmony, team work and sharing, trails, pragmatic progress". Give us a chance and we will prove our capability. With your kind help, we believe that we can create a bright future with you together.
By Doris from Germany - 2017.09.16 13:44
We have been engaged in this industry for many years, we appreciate the work attitude and production capacity of the company, this is a reputable and professional manufacturer.
By Julia from Kenya - 2018.07.26 16:51
